CAE Simuflite - Orlando - Tech 1,2,3 slots

[guest]

CAE Orlando Training Center

CAE Orlando Training Center, Orlando, Florida U.S.

Simulator Technician I

Ref: FL-05-011 through FL-05-013
(http://jobsearch.monster.com/getjob.asp?JobID=27035620&AVSDM=2005%2D02%2D04+16%3A20%3A39&Logo=1&q=simulator&sort=rv&vw=b&cy=US&brd=1,1862,1863)
Responsibilities:
? Assist in diagnosing and correcting problems on all training devices and associated hardware.
? Perform standard Morning Readiness tasks on all training devices.
? Perform routine Preventive Maintenance (PM) tasks and inspections on all training devices.
? Assures training devices are maintained according to published procedures and standards.
? Assist in maintaining training device reliability.
? Assures Deficiency Reports (DRs/Snags) are worked in order of priority.
? Assembles and maintains training device sub-systems
? Generate and address any discrepancies observed during working hours.
? Clean training devices, computer rooms, hydraulic rooms, and surrounding areas, as required.

Qualifications - Required:
EDUCATION:
? 2-year technical degree or equivalent related training.
SKILLS:
? Ability to interpret system prints and schematics.
? Ability to utilize technical manuals
? Proficiency in operating test equipment (oscilloscope, multi-meter, signal generator, logic analyzer, etc.).
? Knowledge in analog and digital theory.
? Computer literate (PC and / or computer mainframe/architecture).
? Proficiency in soldering and circuit board repairs.

General:
Resumes accepted by email only.
Any resume received without the ref code # will not be considered.
NO PHONE CALLS PLEASE.

Contact Information:
Human Resources
CAE SimuFlite
hr@<hidden> (hr@<hidden>?subject=Simulator%20Technician%20I%20(FL-05-011%20through%20FL-05-013))
www.cae.com (http://www.cae.com) http://switch.atdmt.com/action/monmon_jobviews_10


Simulator Technician II

Ref: FL-05-014 through FL-05-017 and FL-05-028
(http://jobsearch.monster.com/getjob.asp?JobID=27035892&AVSDM=2005%2D02%2D04+16%3A26%3A42&Logo=1&q=simulator&sort=rv&vw=b&cy=US&brd=1,1862,1863)
Responsibilities:
? Perform standard Morning Readiness tasks on all training devices.
? Perform routine Preventive Maintenance (PM) tasks and inspections on all training devices.
? Perform visual alignments.
? Calibrates and maintains all training devices and associated hardware.
? Identifies, investigates, and solves various problems using knowledge of training devices and aircraft systems.
? Assembles and maintains training device sub-systems
? Analyses test results to isolate inoperative unit.
? Analyses technical data (QTG, ATM, etc).
? Assures training devices are maintained according to published procedures and standards.
? Maintains hardware and software configurations in accordance with standards.
? Assist in maintaining training device reliability.

Qualifications - Required:
EXPERIENCE:
? 4 years direct simulator experience or 5-10 years maintenance experience on aviation avionic / electronic systems.
EDUCATION:
? 2-year technical degree or equivalent related training.
SKILLS:
? Ability to troubleshoot to system level.
? Ability to use and interpret all diagnostic tools available.
? Ability to perform PM?s, preflight, and postflight checks.
? Ability to perform in-depth visual adjustment and set-ups.
? Ability to assist with projects such as refurbishment?s and other hardware modifications.

Qualifications - Preferred:
? 1 year experience maintaining CAE training devices

General:
Resumes accepted by email only.
Any resume received without the ref code # will not be considered.
NO PHONE CALLS PLEASE.

Contact Information:
Human Resources
CAE SimuFlite
hr@<hidden> (hr@<hidden>?subject=Simulator%20Technician%20II%20(FL-05-014%20through%20FL-05-017%20and%20FL-05-028))
www.cae.com (http://www.cae.com) http://switch.atdmt.com/action/monmon_jobviews_10


Simulator Technician III

Ref: FL-05-018 through FL-05-021 (http://jobsearch.monster.com/getjob.asp?JobID=27036039&AVSDM=2005%2D02%2D04+16%3A30%3A27&Logo=1&q=simulator&sort=rv&vw=b&cy=US&brd=1,1862,1863)

Responsibilities:
? Perform standard Morning Readiness tasks on all training devices.
? Perform routine Preventive Maintenance (PM) tasks and inspections on all training devices.
? Perform in-depth visual alignments.
? Calibrates and maintains all training devices and associated hardware.
? Identifies, investigates, and solves complex problems using knowledge of training devices and aircraft systems.
? Assist Engineering Department with modifications, design changes, and software enhancements.
? Debug routine software problems and implements, Installs and evaluate software fixes.
? Assures training devices are maintained according to published procedures and standards and meet regulatory requirements.
? Maintains hardware and software configurations in accordance with standards.
? Assist in maintaining simulator reliability.

Qualifications - Required:
EXPERIENCE:
? 5 years direct simulator experience.
? 2 years maintaining CAE training devices
EDUCATION:
? 2-year technical degree or equivalent related training.
SKILLS:
? Proficiency with software diagnostics and utilities.
? Demonstrated troubleshooting skills
? Ability to perform in-depth analysis and research for hardware modifications and upgrades.
? Ability to assist the Engineering Department with modifications, design changes, and software enhancements.
? Ability to assist with the development and delivery of technical training for other technicians.

Qualifications - Preferred:
? Ability as the ?Technical Expert? on at least one major simulator system (i.e. motion, visual, aircraft systems, etc.).
? BSEET

General:
Resumes accepted by email only.
Any resume received without the ref code # will not be considered.
NO PHONE CALLS PLEASE.

Contact Information:
Human Resources
CAE SimuFlite
hr@<hidden> (hr@<hidden>?subject=Simulator%20Technician%20III%20(FL-05-018%20through%20FL-05-021))
www.cae.com (http://www.cae.com/) http://switch.atdmt.com/action/monmon_jobviews_10

[guest]

What is the turn-around time for CAE? I put in for one of the tech II positions in Orlando a couple of weeks ago, and still haven't heard back from them.

[guest]

You and every other unemployed sim tech in north america! :box2:

[Egyptian]

And some of us who are emplyed too. I would love to get back to Orlando

[guest]

And some of us who are emplyed too. I would love to get back to Orlando

Wow you showed me! Employed and not in North America! :cheesy:

[goodol55]

...this is a good question. I have also sent in some information to CAE a few weeks ago and have not received a reply, either. Does CAE consider techs with experience from other training companies, or do they prefer to hire techs that are new to simulation?
As far as "Unemployed Sim Techs" in North America, I'll bet there are thousands.....
:faintt:
....and does anyone ever post a "success story" , that is, in this case, actually finding a job! It would be nice to know :help:

[guest]

Anyone fed up waiting for CAE??


Still want a job in Orlando area??

See post Simtech - Sanford FL 16 Feb 2005.

Apply and I'll bet you'll get a call within a couple of days!!

[guest]

I had my telephone interveiw for Orlando. This is Simuflight out of Dallas. Interveiw went well. They want the chosen people there on sight by April 4th. I heard RFT is about June.

[guest]

So does this mean CAE has called or set up interviews with every one already? Do the jobs that are posted to the CAE website mean that those postings were already posted internally and that they are now looking for qualified people from out side the company? Is there any one working at CAE Simuflite that could give us their 2 cents worth?

[Mod Job]

Postings are usually internal and after 3-5 days external. I understand that some offers have been made, some people have accepted, others haven't accepted nor declined. CAE would like to have most everyone in place by mid-March. I heard they are targeting April 4 as a start date. With so many positions to fill I'd expect the postings to stay up until after 4 April.

[Mod Job]

We are pleased to announce that we are hiring resources in our Civil Aviation and Training division following our contract with Jet Blue in Orlando to maintain several full-flight simulators and a variety of other flight training equipment.

FULLY QUALIFIED ENGINEER (INTEGRATION SPECIALIST)

Department: T0 - Orlando Training Center


THIRD SHIFT GROUP LEADER

Department: T0 - Orlando Training Center


ENGINEERING AND MAINTENANCE MANAGER

Department: T0 - Orlando Training Center

To see more details visit the CAE web site

[simtek]

Anyone fed up waiting for CAE??


Still want a job in Orlando area??

See post Simtech - Sanford FL 16 Feb 2005.

Apply and I'll bet you'll get a call within a couple of days!!

:erm-: Even for non-USA based Techs?

[cooch56]

So who all got invited too come to Orlando for test and interview? Too bad they won't give us any flight benies if we are lucky enough to sign on. Guess I'll see some of ya floating around the hotel on Thursday and Saturday. Good luck too all... :clap:

[dartdude]

One of my cohorts will be there 2 April for his interview. Hate to see him go-but this place is dying a LLLOOONNNGGG SSSLLLOOOWWW DDDEEEAAATTTHHH!!! And more power to all the ones talking with Flt Safety and L3 over at Flt School XXI. Hope you get the job.This site on Fort Rucker has a new rumour every single day about what is getting shutdown and disassembled, etc. Another co-worker just informed me that an Army individual told him tonight that it goes away this coming Oct. Last we had previously heard was Oct. 2006. :faintt:

[guest]

When you say "it" may being going away in October, what exactly is "it"? Thanks for clarifying.

[Egyptian]

And, who is the contractor that may be going away? Or will they be moving sims to other locations? If this is the Apache program, there are rumors all over the place, especially about the few remaining A models. :feedback:

[goodol55]

What is the turn-around time for CAE? I put in for one of the tech II positions in Orlando a couple of weeks ago, and still haven't heard back from them.

Well, I inquired about them too. So, anyway, Guest, how about setting up a "Name" for yourself? Don't be shy....Leave a message.....bye bye

[jagibson81]

CAE flew me down to Dallas today to interview for a Tech position in Orlando. They actually have positions available in Denver, Dallas, and Orlando. The interview went well. They say thay haven't made any offers yet but are looking at late April, early May to get the site up and running.

[JMac1207]

"IT" likely refers to some of the simulators at Rucker. Especially the UH-1 simulators. But it is just rumors and we all know on military contracts how rumors get going but sometimes have no merit. :cruch:

[dartdude]

Aw, come on Jerry! When our customers are the ones telling us that, then that makes it more legit. :box2:

[cooch56]

But customers are also confused between truth with gossip.

[dartdude]

The Army SFC here informed us the cutback begins December 2006.
Have lost two folks to L-3 over at Flight School XXI this very week. Another one interviewed this past weekend with CAE in Orlando, and will hear back within 7 days( yes or a no). :box2:

[Nascar_Fan]

It is just wait and see for December 2006.

With all of the people jumping to L3 and Orlando, it ought to open up some new jobs.

Watch and see....

[jayhawk]

I think that it is a possibility of pulau not serious looking to fill its 3 to 4 tech positions and the hyd positon it now has open. They could be attempting to downsize with people leaving rather having to lay off when the 2B24 goes away.

[dartdude]

They are having to write the job description over so they can hire an individual off the street-the present description has kept anyone from getting the position due to lack of experience as it is currently written. Had an individual who had put in for the hyd. position that works here-BUT, it kept him from getting it-so now he has interviewed and is waiting for a call(or not)
from another company in Florida. :att:

[Sir Simalot]

I guess I didn't get the job. Congradulations on those that did. Hope all works out great for you.